Retour au blog
Guides pratiques 2026-11-20 Sarissa Precision Ltd – Sarissa Precision Limited 0 vues

Building the Destroyed City Ground Floors Kit: Step-by-Step Guide

Building the Destroyed City Ground Floors Kit: Step-by-Step Guide

A practical guide to assembling the Sarissa Precision Destroyed City Ground Floors kit, covering the two included tiles, the Terrain Tile System, and key assembly tips for your ruined city terrain.

What the Destroyed City Ground Floors Kit Contains

The Destroyed City Ground Floors - Mixed x2 kit is designed for building city-based wargaming or diorama scenes. It includes two 100 mm x 100 mm terrain tiles: one straight section and one corner section. Each tile features a low ruined wall, making them ideal for creating the ground floor of a destroyed city block.

The kit is based on the Sarissa Terrain Tile System (TTS), an interlocking tile arrangement that locks your battlefield together for modular and stable gameplay. The tiles are made from 2 mm MDF and 1 mm Greyboard, supplied unassembled and unpainted, with full instructions.

Kit Details at a Glance

  • Destroyed City Ground Floors - Mixed x2: Includes two 100 mm x 100 mm Terrain tiles, one straight section and one corner section. The two tile shapes let you create L-shaped or linear ruined street sections, giving you flexibility in table layout.
    Destroyed City Ground Floors - Mixed x2
    Destroyed City Ground Floors - Mixed x2
  • Destroyed City Ground Floors - Mixed x2: This kit is based on the Sarissa Terrain Tile System (TTS), a 100 mm by 100 mm interlocking tile arrangement that allows you to lock your battlefield together for modular and stable gameplay. The TTS system ensures your terrain stays in place during play and can be expanded with other TTS-compatible tiles.
  • Destroyed City Ground Floors - Mixed x2: Supplied unassembled and unpainted in kit form with full instructions. You will need to assemble and paint the kit yourself, but the included instructions guide you through the process.

Step-by-Step Assembly Guide

The following steps assume you have basic model-making tools: a sharp hobby knife, PVA or wood glue, clamps or weights, and fine sandpaper. Always test-fit parts before applying glue.

  1. Prepare your workspace and parts: Lay out the MDF and greyboard pieces from the kit. Identify the two terrain tile bases (100 mm x 100 mm) and the wall sections. Lightly sand any rough edges with fine sandpaper to ensure clean fits.
  2. Assemble the straight section tile: Apply a thin layer of PVA glue to the tabs on the straight wall section. Press the wall onto the corresponding slots on one 100 mm x 100 mm tile base. Hold or clamp until set. Wipe away excess glue with a damp cloth.
  3. Assemble the corner section tile: Repeat the process with the corner wall section on the second tile base. Ensure the wall aligns correctly at the corner to avoid gaps. Let the glue cure fully before handling.
  4. Check the interlocking fit: Once both tiles are dry, test how they lock together using the TTS system. The tiles should click into place without forcing. If they are tight, lightly sand the edges; if loose, add a small glue shim to the tabs.
  5. Painting and finishing (optional): The kit is unpainted. Prime the MDF and greyboard with a spray primer or brush-on primer. Drybrush or layer acrylic paints to create a ruined stone or concrete effect. The etched detailing provides texture for washes and drybrushing.

Important Considerations Before You Start

The kit does not include any models or accessories; the figures shown in product images are for scale purposes only. The instructions are supplied, but you may need to adjust fit depending on your glue type and clamping method.

The tiles are 100 mm x 100 mm, so plan your table layout accordingly. The TTS system is compatible with other Sarissa Terrain Tile System products, allowing you to expand your ruined city terrain over time.

Articles connexes

Customer Service
Accueil
Produits
Panier
Profil