Retour au blog
Guides pratiques 2026-11-20 Sarissa Precision Ltd – Sarissa Precision Limited 0 vues

Assembling the Trench Defence Line Bundle: Step-by-Step

Assembling the Trench Defence Line Bundle: Step-by-Step

A practical guide to assembling the Trench Defence Line Bundle, a laser-cut MDF expansion for your trench system. Learn what's in the box and how to build it.

What the Trench Defence Line Bundle Contains

The Trench Defence Line Bundle is a laser-cut MDF kit designed to add a fortified gun emplacement to an existing Sarissa Trench System. It is supplied unassembled and unpainted, with full instructions included. The bundle contains 3x Trench Gun Emplacement/Ammo Stash, 4x Trenched Angled Corner, and 1x Trench Straight (x2). The emplacement is built to house a large 28mm 10.5 cm leFH 18 howitzer or similar model, allowing you to create a fortified firing line.

Kit Details at a Glance

  • Trench Defence Line Bundle: Add heavy firepower to your existing Sarissa Trench System with this Gun Emplacement Expansion. Built to house a large 28mm 10.5 cm leFH 18 howitzer or similar, it slots directly into your trench layout to create a fortified firing line. This tells you the exact scale and purpose of the emplacement, so you can match it to your howitzer model and trench layout.
    Trench Defence Line Bundle
    Trench Defence Line Bundle
  • Trench Defence Line Bundle: Includes: 3x Trench Gun Emplacement/Ammo Stash, 4x Trenched Angled Corner, 1x Trench Straight (x2). Supplied unassembled and unpainted in kit form with full instructions. Knowing the part count helps you plan your build and verify you have all pieces before starting.

Step-by-Step Assembly Guide

Before you begin, ensure you have a clean, flat work surface, a hobby knife, wood glue or PVA, and a small clamp or weights. The kit is laser-etched MDF, so parts should push out easily after scoring the tabs.

  1. 1. Organise and identify parts: Lay out all the laser-cut sheets. Separate the three gun emplacement/ammo stash sections, the four angled corners, and the two straight trench sections. Refer to the included instructions for part numbers if provided.
  2. 2. Assemble the gun emplacements: Each gun emplacement is a small fortified position. Remove the parts from the sheet and clean up any tabs with a hobby knife. Dry-fit the walls and floor to check alignment, then apply wood glue to the joints. Use a clamp or weight to hold them square while the glue sets.
  3. 3. Build the trench sections: Assemble the four angled corners and the two straight sections. These slot into your existing trench layout, so ensure they fit the same trench profile. Dry-fit before gluing to confirm the angles match your layout plan.
  4. 4. Combine emplacements with trench sections: Once the glue on all sections is dry, connect the gun emplacements to the trench straight and angled corner pieces. The emplacement is designed to slot directly into the trench layout, creating a continuous fortified firing line.
  5. 5. Finishing touches: The kit is supplied unpainted. You can paint the MDF with acrylics or spray primer. The laser-etched detailing provides texture that will show through a drybrush or wash. Any models or accessories shown in the product images are for scale purposes only and are not included.

Important Considerations Before You Start

The Trench Defence Line Bundle is an expansion for an existing Sarissa Trench System, so you will need that base set to integrate the new sections. The kit is unassembled and unpainted, and the instructions are included. Take your time with dry-fitting to ensure the emplacement and trench sections align correctly before gluing. The MDF is a sturdy material, but it can warp if too much glue is applied, so use a thin, even layer.

Articles connexes

Customer Service
Accueil
Produits
Panier
Profil