Torii Gate 2 Scale Model: Adding Japanese Flair to Your Table
By Sarissa Precision Ltd – Sarissa Precision Limited | Published: 2026-10-29
Category: How-to Guides
Learn how to build and paint the Torii Gate 2 laser-cut wooden scale model. Add authentic Japanese shrine flair to your wargaming table with practical assembly steps.
Quick answer
To add Japanese flair to your table, build the Torii Gate 2 from Sarissa Precision: it assembles quickly with basic tools and paints up to look like weathered shrine wood.
Why the Torii Gate 2 fits your terrain
The Torii Gate 2 marks the entrance to a shrine or tomb, symbolizing the transition from the earthly to the divine. On a wargaming table, it instantly establishes a Japanese setting without taking up much space—the kit measures D90 x W150 x H115mm, making it a compact centerpiece for a shrine courtyard or a roadside marker.
Because it's supplied unassembled and unpainted, you control the finish. You can match it to existing terrain or give it a distinctive red-and-black shrine look. The kit comes with full instructions, so even if you're new to laser-cut wooden models, you can complete it in an afternoon.
Trade-offs to consider before you start
Laser-cut kits require careful removal of parts from the fret. Burrs or charred edges can affect fit, so take your time. Also, the Torii Gate 2 is a single structure—if you want a full shrine complex, you'll need multiple gates or additional kits.
Painting is optional but recommended. Unpainted wood looks fine for some tables, but a coat of primer and paint will make it stand out and protect it from wear during gameplay.
Step-by-step assembly and painting
- Prepare your workspace: Lay out all parts from the fret. Use a sharp hobby knife to gently detach each piece, sanding any rough edges. Check that you have all pieces before gluing. Checkpoint: Dry-fit the main pillars to the top beam before applying glue.
- Assemble the frame: Apply a thin layer of wood glue to the joints. Press the two pillars into the base and attach the top beam. Hold each joint for 30 seconds to ensure a strong bond. Checkpoint: Use a square to ensure the pillars are perpendicular to the base.
- Add the secondary beams: Attach the lower crossbeam and any additional lintels as per the instructions. These pieces give the gate its characteristic silhouette. Let the glue cure fully. Checkpoint: Wipe off any excess glue with a damp cloth before it dries.
- Prime and paint: Spray or brush on a primer suitable for wood. Once dry, paint the gate in your chosen scheme—traditional vermilion red with black accents works well. Use thin coats to avoid obscuring the laser-cut details. Checkpoint: Allow each coat to dry completely before applying the next.
- Weather and finish: For a weathered look, dry-brush a lighter wood tone over the edges and apply a dark wash to recesses. Seal with a matte varnish to protect the paint during handling. Checkpoint: Test the varnish on a spare piece of wood first to avoid a glossy finish if you prefer matte.
Product facts
- Torii Gate 2: The Torii Gate 2 is supplied unassembled and unpainted in kit form with full instructions. You can build and paint it to match your terrain, and the included instructions make assembly straightforward for hobbyists of any level.
Torii Gate 2
