Building the A Baron Land Terrain Set for 28mm Wargames

By Sarissa Precision Ltd – Sarissa Precision Limited | Published: 2026-10-27

Category: How-to Guides

Step-by-step guide to assembling the A Baron Land Terrain Set for 28mm wargames. Get tips on dry-fitting, gluing, and painting MDF terrain for medieval battles.

Quick answer

Assemble the A Baron Land Terrain Set by dry-fitting each MDF piece, using PVA glue for strong joints, and painting with acrylics for a weathered medieval look.

Why dry-fitting matters for MDF kits

MDF terrain kits like the Baron Land set have interlocking tabs and slots that can be tight. Dry-fitting lets you check alignment before glue sets, preventing misaligned walls or roofs. It also helps you identify which pieces need sanding for a snug fit.

Choosing the right glue

PVA (white glue) is the standard for MDF because it dries clear and bonds well. Avoid superglue—it can wick into the MDF and create brittle joints. For larger structures like the church, use a slower-setting PVA to adjust positioning.

Assembly steps for the Baron Land Terrain Set

1. Prepare your workspace: Lay out all MDF sheets and sort pieces by size. Check the instructions for part numbers. Sand rough edges with fine-grit sandpaper. Missing a piece early saves frustration later.
2. Dry-fit the church structure: Assemble the church walls and roof without glue. Ensure tabs slot fully into grooves. If pieces are too tight, sand the tabs slightly. If the roof doesn't sit flush, trim the wall tabs.
3. Glue the walls: Apply PVA glue to the tabs of the front and back walls. Insert into the side wall slots. Hold for 30 seconds to set. Wipe excess glue with a damp cloth. Too much glue can seep into visible seams—use sparingly.
4. Attach the roof: Apply glue to the roof supports and press the roof panels into place. Check alignment from all angles. Use masking tape to hold panels while drying. Uneven roof panels are a common mistake—tape them level.
5. Assemble the timber-planked buildings: Repeat the dry-fit and glue process for the smaller structures. Pay attention to plank orientation for a realistic look. Planks that face the same direction look more natural.
6. Paint and finish: Prime with a spray primer, then basecoat with earthy browns and grays. Dry-brush with lighter tones for highlights. Add static grass or gravel for bases. Let glue cure fully (24 hours) before painting to avoid warping.

Product facts

A Baron Land Terrain Set - 28mm: This set includes a traditional Saxon/Norman church supported by timber-planked structures, capturing a rural settlement under threat. The church is the centerpiece, so take extra care aligning its walls and roof for a stable, visually striking model.
A Baron Land Terrain Set - 28mm