Building the San Lezere High Street Scenery Set for Wargaming

Quick answer

Assemble the San Lezere High Street Scenery Set by dry-fitting parts, using PVA glue, and painting in layers. This guide covers the key steps to build a durable, display-ready 28mm wargaming street.

Step-by-step assembly guide

1. 1. Dry-fit all parts before gluing: Lay out the MDF sheets and identify each piece by the laser-etched labels. Press tabs into slots without glue to check alignment. Mark any pieces that need sanding. Common mistake: gluing before dry-fitting can cause misaligned walls and gaps that are hard to fix.
2. 2. Sand edges and remove burn marks: Use fine-grit sandpaper (220 grit) to smooth the edges of each piece. Focus on tabs and slots to ensure a snug fit. Wipe dust with a damp cloth and let dry. Checkpoint: sanded edges help paint adhere better and reduce the dark burn lines from laser cutting.
3. 3. Glue walls and main structure: Apply PVA glue to the tabs and slots of the front and side walls. Press together and hold for 30 seconds. Use masking tape to hold joints while the glue sets. Work on a flat surface to keep walls square. Common mistake: using too much glue causes squeeze-out that is visible on the shop fronts. Apply a thin, even layer.
4. 4. Attach the roof and upper floors: Once the walls are dry, glue the roof supports and then the roof panels. For the upper floors, align the floor pieces with the wall tabs. Ensure the roof overhangs evenly on all sides. Checkpoint: let the walls cure for at least 30 minutes before adding the roof to avoid shifting.
5. 5. Paint the shop fronts and details: Prime the assembled terrain with a spray primer designed for MDF. Paint the shop fronts with acrylics: use a base coat, then dry-brush for highlights. Add window frames and signs with a fine brush. Common mistake: painting over the CMYK print without priming can cause the ink to bleed. Always prime first.
6. 6. Weather and seal the finish: Apply a wash (e.g., Agrax Earthshade) to recessed areas for shadow. Dry-brush a lighter color on edges for wear. Seal with a matte varnish spray to protect the paint during gameplay. Checkpoint: test the varnish on a scrap piece first to ensure it does not yellow or react with the acrylics.

Kit highlights

• San Lezere High Street Scenery Set (28mm) CMYK: At the centre of the proud market town of San Lezere, this row of shops and homes once bustled with everyday life. Traders opened shutters at dawn, neighbours gathered on the pavements, and families watched the world go by from upstairs windows. The detailed shop fronts and windows give you a narrative-rich terrain piece that adds character to any 28mm skirmish game.