Assembling a Resin Drunken Dwarf Miniature
By Sarissa Precision Ltd – Sarissa Precision Limited | Published: 2026-10-20
Category: How-to Guides
Step-by-step guide to assembling the Drunken Dwarf resin miniature from Sarissa Precision. Learn key tips for cleaning, gluing, and painting your 28mm model.
Quick answer
Assemble your Drunken Dwarf resin miniature by first cleaning the cast with soapy water, then dry-fitting, gluing with super glue, and finally priming before painting.
Why resin needs special handling
Resin miniatures like the Drunken Dwarf capture fine detail but require a few extra steps compared to plastic or metal models. The casting process can leave a thin release agent on the surface, which prevents paint and glue from bonding properly. A simple wash with soapy water removes this residue and ensures a strong hold.
Resin is also more brittle than plastic. Avoid bending or forcing parts during assembly. If a piece seems warped, dip it in warm water for a few seconds, gently straighten it, and let it cool in position.
Step-by-step assembly
- 1. Clean the miniature: Wash the resin parts in warm soapy water using a soft toothbrush. Rinse thoroughly and let dry completely. This removes any mold release agent. Skipping this step can cause paint to peel or glue to fail later.
- 2. Dry-fit all parts: Before applying any glue, hold the pieces together to check fit. Resin parts sometimes have slight flash or mold lines that need scraping with a hobby knife. If a joint feels loose, sand the contact surfaces lightly for a better bond.
- 3. Glue with super glue (cyanoacrylate): Apply a small drop of super glue to one surface and press the parts together for 15-30 seconds. Resin does not react with plastic cement; use CA glue or epoxy. Too much glue can squeeze out and ruin detail; use a pin or toothpick to apply tiny amounts.
- 4. Prime before painting: Spray or brush on a thin primer coat. Use a primer designed for resin or a general hobby primer. Let it cure fully (check the label, often 24 hours). A thick primer layer fills in fine sculpted detail; apply in light, even passes.
- 5. Paint and seal: Paint your miniature with acrylic hobby paints. Once finished, apply a matte varnish to protect the paint from chipping during handling or gaming. Resin is less flexible than plastic, so a varnish layer adds durability for tabletop use.
Product used in this guide
- Drunken Dwarf: This set contains 1 Drunken Dwarf resin miniature made from cast resin for excellent detail. The high detail of cast resin means careful cleaning and priming will make the miniature's sculpted features really stand out after painting.
Drunken Dwarf
