Storing and Displaying Your Terrain Tile System Between Games
By Sarissa Precision Ltd – Sarissa Precision Limited | Published: 2026-10-31
Category: Tips & Care
A practical step-by-step routine for storing terrain tiles flat, protecting edges, and displaying miniatures between games using the Terrain Tile System Storage & Display Box.
Quick answer
Store your terrain tiles vertically in the Terrain Tile System Storage & Display Box, using its side supports to keep full and half tiles flat and aligned. Then use the clear acrylic panel to display finished miniatures on the same shelf-ready box.
Why flat storage matters more than tight stacking
Modular tiles only join cleanly when their edges and surfaces stay flat. Stacking them in a loose pile or leaning them against a wall puts pressure on corners and can bow thin MDF over time. The Storage & Display Box is designed to hold tiles on side supports rather than in a heap, which keeps the playing surface supported and reduces edge wear.
If you add new pieces from a terrain tile system expansion pack 5, check that each tile sits fully on the supports before closing the box. A tile that overhangs or rests on its edge will not stay flat, and it can push neighbouring tiles out of alignment.
When display space and storage space compete
A dedicated terrain tile display shelf looks great, but open shelving exposes tiles to dust and accidental knocks. The Storage & Display Box solves both jobs in one footprint: tiles slide onto the side supports, and miniatures sit behind the clear acrylic slide-in panel. That makes it a practical compromise for small homes or clubs that need to pack away between sessions.
The trade-off is capacity. The box is sized to fit on a bookshelf, so it suits a warband or a small collection rather than a full club army. If you need to store several factions, plan one box per project or rotate which miniatures are on display.
Your between-games storage and display routine
- Clear and inspect each tile: Remove loose dice, templates, and scatter pieces from every tile. Wipe the surface with a dry cloth and check corners for lifting texture or loose flock. Common mistake: storing a tile while it is still damp from glue or paint, which can warp it inside the box. Let any repaired or painted tiles dry completely before they go into storage.
- Sort full and half tiles: Group full tiles together and half tiles together so you can slide them onto the correct side supports without forcing. Common mistake: mixing sizes on the same support, which leaves one tile resting on its edge. If a tile does not sit flush, stop and re-sort rather than pressing it down.
- Slide tiles onto the side supports: Lower each tile gently onto the supports, keeping the decorated face clear of the box walls. Do not stack tiles loosely on top of each other. Common mistake: overfilling the box so the lid or acrylic panel presses on the top tile. Leave a small gap between the tallest tile and the panel.
- Place miniatures behind the acrylic panel: Set finished miniatures on the display side, keeping bases away from the sliding channel. Slide the clear acrylic panel into place until it seats fully. Common mistake: trapping a base or weapon under the panel, which can bend the model or scratch the acrylic. Check the panel slides freely before you put the box on the shelf.
- Store on a level bookshelf: Place the box on a flat shelf out of direct sunlight and away from damp. Avoid stacking heavy boxes on top of it. Common mistake: storing the box on an uneven surface or in a garage, where humidity can affect MDF tiles. Label the box with the faction or board it holds so you can find the right tiles quickly.
Product facts
- Terrain Tile System Storage & Display Box: Designed specifically to store terrain tiles and display miniatures, with side supports that hold full and half tiles. You can keep a mixed set of tile sizes organised in one box instead of separating full and half tiles into different containers.
Terrain Tile System Storage & Display Box - Terrain Tile System Storage & Display Box: Miniatures can be displayed behind a clear acrylic slide-in panel, and the box is sized to fit on a bookshelf. Finished models stay visible and dust-protected without taking up a separate display cabinet.
