Start with the footprint, not the paint pot
The Forge Workshop is a two-part MDF building kit: a Rack Close House and a Corner Forge Workshop Front. Before you glue anything, measure the space on your table where you want the forge to sit. The kit has a footprint of approximately 170 mm x 140 mm and stands 220 mm tall, so it needs a clear corner rather than a narrow shelf. The set is designed for 25–32 mm scaled games, which means it can work alongside most fantasy and historical collections in that range.
Because the kit arrives printed in Sarissa-CMYK colour, your planning is mostly about placement and assembly order, not about choosing a paint scheme. The supplied information confirms that no paint is required, so you can treat the printed finish as the final look or use it as a base for your own detailing later.
What the kit gives you to work with
- Forge Workshop: Set contains a Rack Close House and a Corner Forge Workshop Front. These are the two main structures you will assemble and place, so plan how they sit together before gluing.

Forge Workshop - Forge Workshop: The footprint is 170 mm x 140 mm (approx.) and the building is 220 mm tall. Use these dimensions to check the kit fits your table or terrain board without overhanging edges.
- Forge Workshop: Built for 25–32 mm scaled games. This tells you which figure ranges the building is intended to sit alongside.
- Forge Workshop: Printed in Sarissa-CMYK colour and supplied unassembled with full instructions. The colour is already applied, so you can skip painting and go straight to assembly if you prefer.
A practical assembly order for the two structures
The kit comes with full instructions, and the printed sheets are designed to pop out. The sequence below is a general approach for pre-coloured MDF buildings; follow the supplied instructions for the exact part numbers and glue points.
- Check the parts against the instructions: Lay out the sheets and confirm you have the Rack Close House and Corner Forge Workshop Front components before you start. The set also includes one Sarissa-CMYK printed extension accessory, so identify that piece early.
- Dry-fit the main walls: Push the wall sections together without glue to see how the corners meet. This helps you spot any tight slots before adhesive makes them permanent.
- Glue the Rack Close House first: Build the larger house shell before attaching the forge front. A stable box shape gives you a square reference for the smaller front section.
- Attach the Corner Forge Workshop Front: Offer the front up to the house and check the alignment of the printed surfaces. Glue only once you are happy with the join.
- Add the extension accessory: The printed extension accessory is a separate piece; fit it after the main structures are solid so you can judge its position against the finished building.
Painting and finishing: what the kit already does for you
The Forge Workshop is sold as a pre-coloured kit, and the supplied information states clearly that no paint is required. That makes it a low-friction option if you want a blacksmith forge scenery build without a painting queue. The printed Sarissa-CMYK finish is described as hard-wearing, so it should stand up to normal tabletop handling.
If you do want to paint or weather the building later, treat the printed surface as a base coat rather than a bare material. The supplied information does not include specific preparation or paint-compatibility instructions for the printed surface, so test any paint or wash on an inconspicuous area first. Any models or accessories shown in product images are for scale purposes only and are not included, so plan your blacksmith figures and anvil scatter separately.
Checks before you commit glue to MDF
- Table space: The 170 mm x 140 mm footprint is compact but not tiny; check it against your board edges and any neighbouring buildings.
- Height clearance: At 220 mm tall, the forge will stand above many low ruins and walls. Make sure it does not block line of sight in a way that unbalances your layout.
- Scale match: The kit is built for 25–32 mm games. If your collection is smaller or larger, compare the door and storey heights to your figures before buying.
- Contents: The set includes the printed building and one printed extension accessory. Models and accessories shown in images are not included.
Where the Forge Workshop fits in a wargaming table
A forge is a natural focal point for a medieval workshop scenery build. The Rack Close House gives you a residential or storage block, while the Corner Forge Workshop Front adds the working face of the smithy. Because the kit is pre-coloured, it can sit alongside painted resin or plastic terrain without looking out of place, provided the printed colour palette matches your collection.
The supplied description places the forge in Tollingchester, serving the guard's weaponry and travellers' needs. That gives you a narrative hook for scenarios: a controlled military asset that also trades with civilians. The kit does not include interior details or loose forge equipment, so any anvil, tools, or figures you want inside the scene come from your own collection.


