Start with the kit, not the glue
The City Block: Residential Corner Shop is a laser-cut MDF kit supplied unassembled and unpainted with full instructions. Before you open any glue, lay out the sheets and read the supplied instructions through once. The kit is designed with stackable floors and a removable roof, so the order you build in affects how easily you can access the interior later.
The kit contains one residential corner shop with a ground floor, first floor and roof. The catalog dimensions are approximately W180 x D180 x H180mm. Treat those as the footprint to plan around, not as a target to measure your build against.
What the kit gives you to work with
- City Block: Residential Corner Shop: Supplied unassembled and unpainted in kit form with full instructions. You are starting from flat MDF sheets, so the supplied instructions are your primary build reference.

City Block: Residential Corner Shop - City Block: Residential Corner Shop: Contents: 1 x Residential corner shop, ground and 1st floor with roof. The kit is a two-storey corner building, which sets the height and the number of floor plates you will handle.
- City Block: Residential Corner Shop: Laser etched detail and stackable floors with a removable roof. The etched surfaces and removable roof determine how you should handle the build and finish the model.
A practical assembly order for the corner shop
The kit does not include a step-by-step sequence in the supplied evidence beyond the full instructions, so use this order as a planning aid and follow the manufacturer's instructions where they differ.
- Dry-fit the ground floor: Lay out the ground-floor parts and check how the walls meet the base before applying glue. The corner footprint means two street-facing sides, so confirm which faces carry the etched shopfront detail.
- Build the ground floor shell: Assemble the ground floor as a stable box. Keep the interior accessible if you plan to paint or add details inside, because the stackable floors mean the upper level sits on top rather than sealing the lower one.
- Add the first floor: The first floor is a separate level in the stack. Dry-fit it on the ground floor before gluing its own walls, so you know how the two floors align at the corner.
- Keep the roof removable: The roof is designed to be removable. Do not glue it down if you want access to the upper floor for painting, interiors, or placing figures during games.
- Test the stack before finishing: Once the floors are built, stack them and check the fit. If you have chosen the version with an extra floor, plan the stack order before you paint, because adding a level changes the building's height and the look of the corner.
Choosing between the standard kit and the extra-floor version
The City Block: Residential Corner Shop is available in two variants: the standard kit and a version with an extra floor. The supplied evidence confirms the extra-floor option exists but does not give its dimensions or the height it adds. If height matters for your skyline, check the product listing for the extra-floor variant before ordering rather than assuming a figure.
For a dense city block, the extra floor gives you a taller corner building that can break up a row of lower townhouses. For a smaller diorama or a table where the corner shop is a background piece, the standard two-storey kit keeps the footprint compact.
Footprint and scale facts for planning
- City Block: Residential Corner Shop: Dimensions: approximately W180 x D180 x H180mm. Use these catalog dimensions to plan the building's footprint on your table or diorama base before assembly.
- City Block: Residential Corner Shop: Material: MDF. MDF takes paint and primer differently from resin or plastic, so plan your finishing approach around the material.
- City Block: Residential Corner Shop: Any models or accessories shown are for scale purposes only and are not included. Fire escapes, aircon units and figures shown in product images are separate items, so budget for them if you want that look.
Finishing the laser-etched detail
The kit's laser-etched detail is one of its main visual features, and it is easy to bury under heavy primer. Apply thin coats and check that the etched lines still read after each pass. The supplied evidence does not include a recommended primer or paint brand, so choose a system you already trust on MDF and test it on a spare area of sheet first.
Because the roof is removable and the floors stack, you can finish each level separately. Paint the interior faces before final assembly if you want a clean result, and keep paint out of the slots and tabs so the stack still fits together.
Building a city block around the corner shop
The corner shop is described as a common sight in city blocks and superblocks across North America and 19th/20th-century Europe. That makes it a flexible anchor for several genres: pulp, superheroes, alien invasion, alternative history Cold War or WWII, and post-apocalyptic settings are all listed as suitable.
To build a varied block, combine this kit with more from the CityBlock and Retro Americana lines. The corner position is useful for turning a street corner, and the removable roof lets you place figures inside during a game without dismantling the building. Add fire escapes and aircon units as separate accessories if you want the urban detail shown in the product images, but remember those are not included in the kit.
Checks before you commit glue
- Confirm which variant you have: Check whether your box is the standard corner shop or the extra-floor version before you plan the stack height.
- Dry-fit every floor: Stackable floors only work if the tabs and slots line up cleanly. Test the fit before glue makes it permanent.
- Leave the roof loose: The removable roof is a gameplay feature. Keep it unglued unless you have a specific reason to fix it.
- Plan accessories separately: Fire escapes and aircon units are shown for scale and are not included, so order them separately if you want them.


