Two kits, one prison camp scene
The Cooler and Barracks 28mm kits give you a compact military prison or POW camp setup for your wargames table or diorama. Both are supplied unassembled and unpainted in kit form with full instructions, so you can build them as a pair or use them separately. The Cooler is a small isolation cell, while the Barracks is a larger building with bunk beds and a stove inside.
This guide walks through the practical decisions you will make while building both kits: how to sort the parts, how to plan the layout, and how to handle the removable roofs. It focuses on what the supplied product information confirms, so you can build with confidence and know where to check your own kit's instructions for details.
What each kit contains
- Barracks (28mm): Contents: 1 x Barracks, 8 x Bunk beds, 1 x Stove. Materials: MDF and greyboard. Features etched detailing and a removable roof. Dimensions: W275 x D120 x H95mm (approx.). Knowing the contents and materials helps you plan assembly order and paint choices before you start.

Barracks (28mm) - Cooler (28mm): Contents: 1 x cooler. Materials: MDF. Features etched detailing and a removable roof. Dimensions: W195 x D95 x H75mm (approx.). The smaller footprint and single-piece contents make the Cooler a quick build that can be assembled first to learn the kit's construction style.

Cooler (28mm)
Sort and dry-fit before you glue
Laser-cut kits reward a little patience at the start. Before reaching for glue, lay out the parts and check them against the instructions supplied with each kit.
- Unpack and identify: Separate the MDF and greyboard sheets. The Barracks includes greyboard components as well as MDF, so keep those sheets distinct. Check the parts against the kit instructions.
- Dry-fit the main walls: Push the wall and floor pieces together without glue to see how they meet. This shows you which tabs and slots pair up and where the etched detailing sits.
- Test the removable roof: Both kits have a removable roof. Dry-fit the roof so you know how it seats before you commit to glue on the walls.
- Plan your glue points: Decide where glue will go on the joints. Keep glue away from any surface that needs to stay clear for the removable roof to lift off.
Build the Barracks shell first
Start with the Barracks walls and floor, leaving the interior fittings until the shell is stable. The kit includes eight bunk beds and a stove, so you will want a solid box to work inside. Assemble the main structure according to the instructions, then test-fit the roof again to make sure nothing has shifted.
The etched detailing on the MDF and greyboard surfaces is part of the kit's look, so avoid sanding or filling over those areas. If you plan to paint, do it after the shell is assembled and the interior fittings are in place, unless your chosen approach makes sub-assembly easier for you.
Fit the interior details
The Barracks kit supplies eight bunk beds and a stove. Arrange the bunks inside the assembled shell before gluing, so you can check access and spacing. The removable roof means you can reach inside later, but planning the layout now saves fiddling after the walls are fixed.
The Cooler is a simpler build with a single cooler piece. Its smaller size makes it a good first kit if you are new to laser-cut MDF buildings. Build it after the Barracks or before, depending on your confidence, but keep the two separate until the glue has set.
Handle the removable roofs
Both kits feature a removable roof, which is useful for placing figures inside during games or for showing interior details in a diorama. When gluing the walls, check that the roof still lifts off freely. Avoid glue squeeze-out along the top edges that could seal the roof in place. If the roof feels tight, check that the walls are square and that no tabs are protruding.
The supplied information does not specify a particular glue or drying time, so follow the instructions included with your kit and your own experience with MDF and greyboard.
Plan the prison camp layout
The Barracks is described as suitable for a larger barracks, a military prison, or a POW camp, and the Cooler is an ideal addition to a military prison or POW camp scene. Together they suggest a compact compound. The Barracks measures approximately W275 x D120 x H95mm, and the Cooler measures approximately W195 x D95 x H75mm. Place them on your table with enough space between them for figure movement and access to the removable roofs.
Any models or accessories shown for scale purposes are not included, so you will need to supply your own figures and scatter terrain. The dimensions above are approximate and taken from the product records, so use them as a guide when planning your layout.
Practical checks before you start
- Read the instructions first: Both kits are supplied with full instructions. Read them before cutting or gluing anything.
- Keep greyboard dry: The Barracks uses greyboard as well as MDF. Greyboard can be more sensitive to moisture, so keep it away from wet glue until you are ready to assemble.
- Test the roof fit early: Dry-fit the removable roof before gluing walls, and check it again after the shell is assembled.
- Work in a clear area: Small parts like bunk beds and the stove are easier to handle on a clean, uncluttered surface.



