Start with the buildings you actually get
A town set is only useful if its building mix matches the scenarios you play. The 15mm North American Town set is built around variety rather than repetition: it runs from a shack and three cabins up to three planked houses and two centrepiece structures, the Church and the Mansion. That spread is the set's main selling point, because it lets one purchase cover a frontier hamlet and a more established settlement on the same table.
The practical question is not whether nine buildings is a lot. It is whether those nine give you the tabletop roles you need: scatter cover on the edges, a defensible core, and at least one building worth fighting over. The list below is the full contents as supplied, so you can map each piece to a job before you commit.
What the set contains
- 15mm North American Town set: This set contains: 1x Cabin #1 (M536), 1x Cabin #2 (M537), 1x Cabin #3 with Porch (M538), 1x Shack (M539), 1x Planked House (M540), 1x Planked House with porch (M541), 1x Planked House with Porch & Balcony (M542), 1x Mansion (M543), 1x Church (M544). Nine distinct buildings across three tiers of size and finish let you build a layered settlement instead of a row of identical boxes.

15mm North American Town set - 15mm North American Town set: Complete with two centrepiece buildings - the Church and Mansion. These two are the natural objectives and sightline anchors in a 15mm town terrain layout, so plan your roads and open ground around them first.
- 15mm North American Town set: Supplied unassembled and unpainted in kit form with full instructions. Budget time for assembly and painting on top of the purchase price; the kit gives you the structures, not a finished town.
- 15mm North American Town set: Materials: MDF, Card. Etched detailing. Laser-cut MDF and card keep the buildings light and consistent in scale, and the etched detail gives you a painting guide built into the surface.
Match each building to a tabletop job
Think of the set as three tiers. Assign roles before you glue anything, because a building placed as scatter cover needs a different base and finish from one that will be the centre of a scenario.
- Edge and scatter tier: The Shack (M539) and the three cabins (M536–M538) suit the outskirts of town, farm tracks, and low-value cover. They are the pieces you can place loosely and move between games.
- Street tier: The three planked houses (M540–M542) form the main street. The porch and balcony variants add height and silhouette variation, which matters at 15mm where buildings are small on the table.
- Centrepiece tier: The Church (M544) and Mansion (M543) are the objectives. Give them open approach ground and a road connection rather than burying them in a dense block.
Lay out the centrepieces before anything else
The most common planning mistake is to assemble all nine buildings and then try to fit them onto the table. Work the other way round. Place the Church and Mansion first, decide which one is the scenario objective, and set the roads that connect them. The cabins and planked houses then fill the gaps rather than dictating the plan.
For 15mm north american town wargaming, that order also keeps your table playable. A town that is all buildings and no streets becomes a wall of MDF that blocks movement and line of sight. Leaving deliberate gaps between the street tier gives you firing lanes and routes through the settlement without removing any buildings from the set.
Trade-offs before you buy
The set is priced at USD 58.50 against a catalog comparison price of USD 78.00. Weigh that against what the purchase commits you to.
- Variety versus table coverage: Nine buildings sounds like a full town, but at 15mm they cover a modest footprint once streets are included. If your table is large, plan the set as a town centre and add outlying pieces separately.
- Two centrepieces versus one: The Church and Mansion give you two distinct objective buildings. That is flexible for scenarios, but it also means two larger structures to assemble and paint before the town looks finished.
- Kit form versus ready-to-play: The set arrives unassembled and unpainted with full instructions. That is good value for a modeller, but it is not a scenery piece you can put on the table the same evening.
- MDF and card versus resin or plastic: Laser-cut MDF and card are light and consistent, and the etched detailing rewards drybrushing. The trade-off is that these are not the same as cast resin buildings if that is what your existing collection uses.
What the supplied information does not settle
The catalog confirms the contents, materials, and that full instructions are included, but it does not give individual building footprints or a total set footprint. That means you cannot calculate exact table coverage from the listing alone. If precise dimensions matter for a fixed board, treat the set as a town core and measure the assembled buildings before committing to a permanent layout.
The listing also notes that any models or accessories shown are for scale purposes only and are not included. Plan on the buildings arriving as structures, not a complete diorama.


